设为首页 加入收藏
您现在位置:资讯 >> 国内动态 >> 浏览文章

第71届世界铸造会议交流报告题录

本站 2014-7-4 14:15:50 点击 0
标签
[导读]第71届世界铸造会议交流报告题录
»KEYNOTE LECTURES
1. Technological innovation in the Foundry Industry / Mr. Hiroyoshi Kimura, Kimura Chuzosho Co., Ltd
2. A Foundry with a Vision / Mr. Mikael Johansson, Volvo Group Trucks Operations, Powertrain Production Skövde, Sweden
3. Evolving Global Automotive Industries – Status & Expectations / Prof. Peter N. C. Cooke, University of Buckingham
4. Energy and Competitiveness: From Global To Local / Mr. Eloy Álvarez Pelegry, Orkestra – Basque Institute of Competitiveness
 
» CAST IRON
1. A study on prediction of microstructures and mechanical properties for a ductile iron casting / T.D. Park, Hyundai Heavy Industries Co., Ltd., Ulsan, Republic of Korea
2. Cast Iron nodulization using Tundish Cover and Cored Wire method / M.A Altuna, Grupo Wec, Itziar-Deba, Spain
3. Threading on high strength iron casting; a key operation on final production stages / I. Elosegui, Basque Country University, Mechanical Engineering Department, Bilbao, Spain
4. Understanding Graphite Expansion during the Eutectic Solidification of Cast Iron through combined Linear Displacement and Thermal Analysis / G. Alonso, IK4-AZTERLAN, Metallurgy Research Centre, Durango, Spain
5. Large sized casting constructions of thermal-fatigue resistant cast iron elaborated in integrated system of numerical calculation / A. Pytel, Department of Ferrous Alloys, Foundry Research Institute, Krakow, Poland
6. Solidification of ductile iron inside the mould cavity: some ideas to improve the metal yield” / N.T. Rizzo, Independent consultant, Valencia, Venezuela
7. Effect of carbon, silicon, nickel and other alloying elements on the mechanical properties of as-castferritic ductile irons / J. Lacaze, CIRIMAT, Université de Toulouse, Toulouse, France
8. As-Cast variations in mechanical testing of cast iron and its use to design tests forparameter studies / J. Åberg, Elkem Foundry Technology Products R&D, Kristiansand, Norway
9. The effect of C, SI, Mn, P and S additions on the chilling tendency of cast iron / H. F. López, University of Wisconsin-Milwaukee, USA
10. Effect of Mn and S on the Mechanical properties of Gray Cast Iron / T. Kanno, Kimura Chuzosho Co., Ltd. ,Shizuoka-ken,Japan
11. Optimizing of alloying elements and heat treatment cycle on production of ductile iron casting with subzero impact energy absorption / F. Sahihi, Oil Turbo Compressor Engineering Company, Teheran, Iran
12. Effect of microstructure on the mechanical and performance properties of high-vanadiumcast iron / M. Kawalec, AGH-University of Science and Technology, Krakow, Poland
13. Grey cast iron for the automotive industry / O. Knustad, Elkem Foundry Technology Products R&D, Kristiansand S, Norway
14. Influence of Manganese and Nitrogen on the Microstructure and Mechanical Properties ofFlake Graphite Cast Iron / S. Hiratsuka, Iwate University, Morioka, Japan
15. Effect of surface roughness on eddy current signal of ductile cast iron with different matrix / N. Horikawa, Asahikawa National College of Technology, Asahikawa, Hokkaido, Japan
16. ADI - The New Dream Material for Gear Designers / A. Nofal, Central Metallurgical R&D Institute (CMRDI), Helwan, Egypt
17. The Ductile Iron Treatment Process Revisited / G.M. Hansen, Elkem AS, Foundry Technology Products R&D, Kristiansand, Norway
18. Iron Casting Skin Management in No-Bake Mould – Effects of Magnesium Residual Level and Mould Coating / M. Chisamera, Politehnica University of Bucharest, Romania
19. Austenite stability of austempered ductile iron (ADI) in sub-zero conditions / L. Alava, IK4-AZTERLAN, Metallurgy Research Centre, Durango, Spain
20. Review of Parameters Influencing the Low Temperature Impact Resistance and Other Mechanical Properties of Heavy Section DI Castings / S. Grenier, Rio Tinto Iron and Titanium, Sorel-Tracy, Quebec, Canada
21. The use of thermal analysis to compare solidification pattern, and evaluate performance,of several inoculants, in ductile iron / V. Anjos, OCC GmbH, Mönchengladbach, Germany
22. The Science of Intercritically Austempered Ductile Iron (IADI) / A. P. Druschitz, Virginia Tech, Blacksburg, USA
23. Control of ductile iron austempering process by advanced data-driven modeling / M. A. Perzyk, Warsaw University of Technology, Warszawa, Poland
24. Development of a totally new inoculant for ductile iron castings / A. Fay, Ferropem, Chambéry, France
25. An Investigation of Machining Properties of Compact Graphite Iron (CGI) / R. Akyuz, DEMİSAŞ. A.Ş. Vezirhan Beldesi, Bilecik, Turkey
26. Impact Characteristics and Mechanical Properties of Copper Alloyed Spheroidal GraphiteCast Irons / T. Nobuki, Takaya-Umenobe, Higashi-Hiroshima, Hiroshima, JAPAN
27. Controlling in-situ microstructure of S.G iron castings / S. K. Sharma, NS-19-22, NIECS Ltd., Uppalwadi, Nagpur, India
 
» CAST STEEL
1. Study regarding the influence of the material quality on the cavitation erosion resistance of soft martensitic stainless steels used for the casting of hydraulic turbines parts / C. I. Lupinca, “Eftimie Murgu” University of Resita, Romania
2. The use of new essay techniques to investigate the behaviour of austenitic steels with nano-alloys / P. Caballero, TECNALIA, Research and Innovation, San Sebastián, Spain
3. An overview on high manganese steel casting / T. Madzivhandil, Metal Casting Technology Station, Johannesburg, South Africa
4. Effects of Alloying Elements on Heat Shock Resistance of Low Carbon Cast Steel / N. Harada, Kurimoto Ltd, Osaka, Japan
5. Net/Gross yield optimization on high value added steel casting / J. Prat, Ask Chemicals España, Getxo, Spain
6. A Duplex Stainless Steel Casting With 1 wt.% Gadolinium For A Neutron Absorbing Material With High Strength And Corrosion Resistance / B. M Moon, Korea Institute of Industrial Technology, In-Cheon, Republic of Korea
7. New Advances of Foundry AOD Refining Process / H. Yongliang, Shenyang Research Institute of Foundry, Shenyang, China
 
» NON FERROUS
1. Yttrium Addition Effect on High Temperature Mechanical Property of Ni Base / D. S. Kang, Division of Advanced Materials Engineering, Chonbuk National University, Jeonju, Jeonbuk,Republic of Korea
2. Analysis of the behaviour of steel components in contact with AZ91D and AM60 magnesium alloys in HPDC / P. Egizabal, Fundación TECNALIA, Unidad de Fundición y Siderurgia, San Sebastián, Spain
3. The effect of casting shape and density differences between metal-matrix and solid particles on the distribution of the reinforcing phase in composites / M. Szucki, AGH University of Science and Technology, Faculty of Foundry Engineering, Department of Foundry Processes Engineering, Krakow, Poland
4. Effect of Alloying Elements on Sulfide Morphology of Lead Free Bronze Castings with Dispersed Sulfides Particles / T. Maruyama, Kansai University, Suita, Osaka, Japan
5. Microstructure Modification of Al-4.5 %Mg Alloy Using Ultrasonic Treatment / W. Khalifa, Faculty of Engineering, Cairo University, Giza, Egypt
6. Separation of primary phases during solidification from Al – 10 wt% Fe alloy melt by a centrifugal separation / K-Y. Kim, School of Energy, Materials and Chemical Engineering, Korea University of Technology and Education, Cheonan, Republic of Korea
7. Development of a new methodology to use recycled secondary Aluminum substituting primary recycled A356 Aluminum alloy in safety components in low pressure technology / E. Ochoa de Zabalegui, EDERTEK S. Coop., Mondragon, Spain
8. StaCast Project: from a Survey of European Aluminium Alloys Foundries to New Standards on Defect Classification and on Mechanical Potential of Casting Alloys / F. Bonollo, University of Padova, Department of Management and Engineering, Vicenza,
9. Improved grain size prediction in Aluminium-Silicon alloys by thermal analysis / J. Lacaze, CIRIMAT, Université de Toulouse, ENSIACET, Toulouse, France
10. Effect of the cooling rate on distribution of transition elements in the intermetallic Al-Mn-Fe-Si phase in AlSi9MgMn alloy / Z. Z. Brodarac, University of Zagreb Faculty of Metallurgy, Sisak Croatia
11. On the Effect of Strontium Additions over Macro-Shrinkage Porosity Defects in Hypo-eutectic Aluminum Alloys / R. Cuesta , Foundation for the Research and Development in Transport and Energy (CIDAUT), Valladolid, Spain
12. Improvement of Mechanical and Corrosion Behaviour in Die Casting Magnesium Alloys with the Addition of Grain Refiners / T. Posada, BOSTLAN S.A., Polígono Industrial Trobika, Munguía, Spain
13. Intelligent Degassing. Studies on Controlling the Process of Hydrogen Removal from Aluminium / R. Simon, Foseco Europe, Borken, Germany
14. Analysis of the effects of the modifier elements (Sr, Sb) in Al-Si foundry alloys / J. Dúl, University of Miskolc, Miskolc Hungary
15. How to solve air and gas blow holes in the Aluminum Gravity Die Castings? A shop floor experience and 4 case studies / M. Thirugnanam, Chennai, Tamilnadu state, India
16. Development of Heat Treatments for Automotive Components die-cast with Secondary Aluminium Alloy at Semi-Solid state / S. Capuzzi, University of Padova – Dep. of Management and Engineering, Vicenza, Italy
17. Modelling of nucleation substrates size distribution in Aluminium-Zinc alloy / B. Gracz, AGH University of Science and Technology, Faculty of Foundry Engineering, Krakow Poland
18. Development of new Al-Si9Cu3 alloys for HPDC components with tailored properties / I. Vicario, TECNALIA Research & Innovation, San Sebastián, Spain
19. Study of the Influence of Alloying Elements on the High Temperature Properties of Wrought Aluminium Alloys / M. Merchán, Fundación TECNALIA R&I, San Sebastián (Guipúzcoa), Spain
20. Effect of Nb Addition on Young’s Modulus and Linear Expansion Coefficient of Cast Pure Titanium / L. Shibing, Shenyang Research Institute of Foundry, Shenyang city, China
21. Semi-Solid Slurry Generation and Casting by the New ULTRA-SSM Technology Based on Ultrasounds / M. da Silva, Fundació Privada Ascamm, Cerdanyola del Vallès, Spain
22. Improved Precision in Grain Size Prediction by Thermal Analysis and Statistical Analysis in Aluminium Castings / A. Fernández, IK4-AZTERLAN, Metallurgy Research Centre, Engineering, R&D and Metallurgical Processes, Spain
23. Surface Chemical Inhomogeneity of High-Pressure Die Cast Al-Si Alloys and its Effects on Corrosion Behaviors and Adhesive Bonding Capabilities / J. Shi, Institut of Joining and Welding, Technische Universität Braunschweig, Braunschweig, Germany
24. The Influence of Cr content on the Fe-rich phase Formation and Impact toughness of a Die-cast AlSi9Cu3(Fe) alloy / G. Timelli, University of Padova – Dep. of Management and Engineering, Vicenza, Italy
25. Machinability of Short Alumina Fiber Reinforced Aluminum Alloy Composite / K. Asano, Department of Mechanical Engineering, Faculty of Science and Engineering, Kinki University, Higashiosaka, Japan
26. Grain refinement of zinc-aluminium based foundry alloys / W. K. Krajewski, AGH University of Science and Technology, Krakow, Poland
27. Effect of Ultrasonic Vibration on Microstructure of Mg-RE-Zn-Y Cast Alloys / S. Wu, State Key Lab of Materials Processing and Die & Mould Technology, Huazhong University of Science and Technology, Wuhan, P. R. China
28. Microstructure Evolution and Mechanical Properties of Sonoprocessed-Thixocast AC4C Billets / W. Khalifa, Department of Mining, Petroleum and Metallurgical Engineering, Faculty of Engineering, Cairo University, Giza, Egypt
29. High-temperature Study of monotectic transformation, wetting and reactivity of liquid Gd-Ti Alloys / N. Sobczak, Foundry Research Institute, Center for High-Temperature Studies, Krakow, Poland, Motor Transport Institute, Warsaw, Poland
30. Effects of Mould Vibration on Casting Characteristics of Al-6wt%Cu Alloy / M. Sudhansu, Gandhi Institute for Technology, Bhubaneswar, Odisha
31. Effect of microalloying element addition on the microstructure, mechanical and corrosion behaviour of A356 secondary alloy with 0.35wt% Fe / S. Méndez, IK4-AZTERLAN, Engineering, R&D and Metallurgical Processes, Durango, Spain
32. Interface characterisation of aluminium castings reinforced steel inserts / A. Niklas, Engineering, R&D and Metallurgical Processes, IK4-Azterlan, Durango, Spain
 
» F. TECHNOLOGIES
1. The principle and application of a novel method for fast and dynamically measuring hydrogen partial pressure of aluminum melt / D. Li, School of Material Science & Engineering, Harbin University of Science and Technology, Harin, P.R. China
2. Innovation and Practice on Measuring Thermophysical Property of Alloy Melt / D. Li, School of Material Science & Engineering, Harbin University of Science and Technology, Harin, P.R. China
3. Model Predictive Control for Pressurized Molten Metal with Liquid Temperature Drop in Press Casting Process / R. Tasaki, Department of Mechanical Engineering, Toyohashi University of Technology, Toyohashi, Japan
4. A rational for Determining the Benefit of Aeration Green Sands filling / S. Ramrattan, Western Michigan University, Kalamazoo, Michigan USA
5. A New concept for Thermal Sand Regeneration Systems / P. Bocca, Fata Aluminum srl, Pianezza (TO), Italy
6. Improved Determination of Carbon in Cast Iron / K. Toedter, SPECTRO Analytical Instruments, Kleve, Germany
7. A New Process to Produce Consistent High Quality Foundry Grade Chromite Sand / J. D. Howden, Amcol International, Australia
8. Advancements in Cold Box Gassing Processes / J. Kroker, ASK Chemicals L.P., Dublin, Ohio USA
9. The Melting, Holding and Pouring Process. Energy and Process-Related Aspects / I. Abendaño, Hermann Otto Suderow, Las Arenas, Spain
10. Application of Sand Mold Creation By 3D Printer with Artificial Sand / Y. Tomita, Kimura chuzosho co. Ltd., Shimizu-cho, Shizuoka, Japan
11. Refractory innovations permitting time, energy & cost savings in foundry meltshop applications. Advantages with Quick Dry – (qd) refractory / K. Stinzing, Foundry Market Manager, Calderys Refractory Solutions, Neuwied, Germany
12. High Performance Tubular Foam Ceramic Filters for the Foundry Industry / M. U. Voigt, ASK Chemicals Feeding Systems GmbH, Bendorf, Germany
13. Raman Spectroscopy of Flake Graphite as a tool to detect Stress-Strain States in Cast Iron / B. Estandia, SCTI Servicios Científico-Técnicos de Investigación, Edificio de Laboratorios I+D, Universidad de Cantabria, Santander, Spain
14. Sheet Metal Mould Casting – A Novel Alternative to Production of Sand Castings / P.C. Maity, Prof., Mechanical Engg. Dept. CT Institute of Engineering, Management and Technology, Jalandhar, India
15. Modeling and Analysis on Stream-Tube of Pouring Flow with a Pair of Multi-Pendulum in Self-Transfer-Type Automatic Pouring Robot / R. Shibuya, Toyohashi University of Technology, Department of Mechanical Engineering, Aichi, Japan
16. Latest Developments in Recycling Production Residues Employing Coreless Induction Furnaces / W. Schmitz, OTTO JUNKER GmbH, Simmerath, Germany
17. Research and Development of Technology for Large – Thin Wall – High Quality Aluminum Castings for Aircraft Industry / M. Horacek, Brno University of Technology, Institute of Manufacturing Technology, Brno, Czech Republic
18. Optimum Trajectory Generation for Lower Position Pouring and Outflow Liquid Falling Position Control / A. Ito, Toyohashi University of Technology, Department of Mechanical Engineering, Aichi, Japan
19. Development of high pressure die casting dies with internal refrigeration and sensors with reinforced cast steel / I. Vicario, TECNALIA Research & Innovation, San Sebastián, Spain
20. Increasing the weldability of die cast parts by minimal die lubrication / Ch. Garthoff, Institut of joining and welding, University of Technology Braunschweig, Braunschweig, Germany
21. Vacuum Technology the Modern Processing of Bentonite-Bonded Molding Sand in Foundries / C. Heynen, Maschinenfabrik Gustav Eirich GmbH & Co KG, Hardheim, Germany
22. The Influence of Process Parameters to Composite Interface Organization and Performance of Liquid/solid Bimetal / S. F. Rong, School of Materials Science and Engineering, Jiamusi University, Jiamusi, China
23. A study on design of centrifugal casting process for a large aluminum motor rotor / J. H. Yoo, Hyunday Heavy Industries Co., Ltd, Ulsan, Republic of Korea
24. Opportunities to Optimize Internal Cooling Systems Used for the Aluminum Die-Casting Process / S. Müller, Institute of Joining and Welding, Braunschweig University of Technology, Braunschweig, Germany
25. Application Study of Rapid Manufacturing for Engine Parts / Z. Shan, China Academy of Machinery Science and Technology, Beijing, China
26. New developments in hybrid use of induction and plasma heating technologies for melting and holding ferrous and non-ferrous alloys / D. Eguizabal, TECNALIA R&I, San Sebastian, Spain
27. High Temperature Crucible Production, Properties and Application / D. Heumannskaemper, Morgan Advanced Materials MMS, Berkatal, Germany
28. Continuously-iterative casting by freezing-up of tube billets / Y.I. Marukovich, Institute of Technology of Metals, National Academy of Sciences of Belarus, Mogilev, Republic of Belarus
29. Development of Global Holonic Casting Manufacturing Concepts and Principles: A Study / M. Manapuram, North Eastern Regional Institute of Science and Technology,Itanagar, Arunachal Pradesh, India
30. A New Concept in Efficient Vertical Moulding Lines / I. Etxebarria, Loramendi S. Coop, Vitoria-Gasteiz, Spain
 
» MOULDING
1. Clean technology: a innovative organic binder for aluminium and iron casting / M. Vargas, Hüttenes-Albertus, France
2. Low-Emission Core Binders Reduce Core Sand Dilution: TG-GC-MS Analysis of Core Sand Binders and Understanding the Hydrophobic Nature of Core Binder Condensates and Recycled Core Sand / A.N. Zook, Lehigh University, Bethlehem, PA, USA
3. Development of an inorganic core binder system for multiple applications under varying foundry conditions / C. Grefhorst, S&B Industrial Minerals Gmbh, Marl, Germany
4. Nothing is Impossible – Advancements in the Field of Inorganic Binder Systems / J. Müller, ASK Chemicals GmbH, Hilden, Germany
5. New Core Binder System for Aluminum Casting Based on Polysaccharide / T. Aoki, SINTOKOGIO, Ltd.,Toyokawa, Japan
6. Bentonite Modification to Meet Today’s Molding Requirements / C. Grefhorst, S&B Industrial Minerals Gmbh, Marl,
7. The High Temperature Deformation Behaviour of Bentonite Bonded Sands and Possibilities for their Influence – New Results / H. Polzin, TU Bergakademie Freiberg, Foundry Institute, Freiberg, Germany
8. Creation of Castings/Mold Interface Characterizedn by Heat Insulation and Good Heat Transfer in Aluminum Die-casting / Y. Furukawa, Toyota Motor Corporation, Toyota, Japan
9. Research on Digital Forming Process of Desulfurization Gypsum Mould / Z. Wang, Advanced Manufacturing Technology Center, China Academy of Machinery Science & Technology, Beijing, China
10. Thermo-physical properties vs. Temperature of selected foundry sands / P.K. Krajewski, AGH University of Science and Technology, Faculty of Foundry Engineering, Krakow, Poland
11. Influence of the furan moulding sand on the nodular Iron casting surface quality / R. Dańko, AGH University of Science and Technology, Faculty of Foundry Engineering, Krakow, Poland
12. Consistent coating application properties through automated preparation and continuous density control / G. Genzler, Foseco Europe, Borken, Germany
13. 3D Sand printing of cores & moulds – Additive Manufacturing / D. R. Stevenson, ExOne Europe, Augsburg, Germany
14. The Use of Specialty Sand Blends to Improve Casting Quality and Reduce Costs / S. Ravi, University of Northern Iowa, Cedar Falls, USA
15. Additives to Reduce Veining and Avoid Refractory Coatings / J. Prat, ASK Chemicals S.A.U, Las Arenas, España
16. The use of nanomaterials for the synthesis of high-temperature phase in refractory coatings / Y. Nicolaichick, Mechanical-technological faculty, Foundry Department Belorussian national technical university, Minsk, Republic of Belarus
17. Semi-Permanent Release Agent for Cold Box Core Production / S. Clifford, ASK Chemicals LP, Cleveland, Ohio, USA
18. Active cooling of resin bonded moulds to reduce the cooling time of heav. section castings without loss of casting quality / W. Stets, IfG – Institut für Gießereitechnik, Düsseldorf, Germany
19. Modern coatings for the manufacture of core packages: Preparation and application / B. Gravesen, Hüttenes-Albertus Chemische Werke GmbH, Fredericia, Denmark
20. A new method for the measurement of flowability of green moulding sand / J. L. Bast, Technical University Bergakademie Freiberg, Freiberg, Germany
21. On the nature of high pressure die casting die failures / B. Zabala, IK4-TEKNIKER, Tribology Department, Eibar, Spain
22. Researches on the Flue Gas Desulfurization Gypsum Mold Formula Used for the Non-Mold Casting / F. Liu, Advanced Manufacturing Technology Center, China Academy of Machinery Science & Technology, Beijing, China
 
» ADV. ENGINEERING
1. Analysis of Casting Defects in Steel Foundry by Computerized Simulations (CAE) - A New Approach along with some Industrial Case Studies / T. Roy, Steel Foundry Division, Texmaco Rail & Engineering. Limited, Kolkata, India
2. Casting Of Titanium Alloys in Centrifugal Induction Furnaces / A. Karwiński, Foundry Research Institute, Kraków, Poland
3. Analysis and Prediction of Casting Defects Using Casting Simulation / G. Thiel, University of Northern Iowa, Cedar Falls, Iowa, USA
4. Simulation of the AZ91/SiCp composite solidification / J. Lelito, AGH University of Science and Technology, Faculty of Foundry Engineering, Krakow, Poland
5. Numerical analysis of the casting process of H282 alloy / J.J. Sobczak, Foundry Research Institute, Krakow, Poland
6. Software for the Optimization of Raw Materials in Casting: A Key to Quality and Competitiveness / A. Montenegro, CEO of AMV Soluciones, Vigo, Spain
7. Calculation of Thermophysical Properties of Casting Alloys and Its Application to Casting Simulation / I-S. Cho, Korea Institute of Industrial Technology, Republic of Korea
8. New trends in simulation process and data management in foundry industry / P. Malinowski, AGH University of Science and Technology, Faculty of Foundry Engineering, Krakow, Poland
9. Mold Filling Simulation using Porous-Media Grids and Gas-Liquid Flow Analysis MARS Method / Y. Maeda, Dept. of Maritime Safety Technology, Japan Coast Guard Academy, Kure, Hiroshima 737-8512, Japan
10. Light weight in iron, new design, process and material strategies developments of nodular graphite iron in suspension components for the automotive industry / P. Rodríguez, Edertek S. Coop., Mondragon, Spain
11. Experimental Verification of Progressive Method for Porosity Prediction / M. Bruna, University of Žilina, Faculty of Mechanical Engineering, Department of Technological Engineering,Slovak Republic
12. Advanced Quality Control in Foundry Manufacturing Process / M. Saleem, University of Duisburg-Essen, Duisburg, Germany
13. Nonparametric Optimum Design Method for Die Casting Using Computational Fluid Dynamics Simulations / K. Kanazawa, Department of Mechanical Engineering, Mie University, Tsu, Mie, Japan
14. Centrifugal Casting of Large Ti-6Al-4V Structural Components supported by Process Modelling / O. Koeser, Calcom ESI, Lausanne, Switzerland
15. Accuracy analysis of Rank Controlled Differential Quadrature method against exact solution of AlZn cooling model / P.L. Żak, AGH University of Science and Technology, Department of Foundry Processes Engineering,Krakow, Poland
16. More robust processes and more added value for foundries based on inverse modelling and tailor-made software tools / A. Meléndez, TECNALIA R&I. Industry and Transport Division, San Sebastián, Spain
17. Development of a simulation procedure for the evaluation of new refractories for aluminium furnaces / I. Vicario, Tecnalia Research & Innovation, San Sebastián, Spain
 
» ENVIRONMENT
1. Low Emission Foundry / M. Favini, IMF Group, Luino, Italy
2. Influence of the reclaim addition to the moulding sand with furan resin on the emission of toxic gases at high temperature / M. Holtzer, AGH University of Science and Technology, Faculty of Foundry Engineering, Krakow, Poland
3. Environmental-Friendly Sand Casting Technique using Frozen Mold / S. Tada, National Institute of Advanced Industrial Science and Technology, Nagoya, Aichi, Japan
4. Environmentally friendly and highly efficient binder systems for self-curing experiencefrom the field / A. Gieniec, ASK Chemicals GmbH, Hilden, Germany
5. Understanding Emission Characteristics of a Foundry Sand Binder / S. R. Giese, University of Northern, Cedar Falls, Iowa, USA
6. Possibility of utilization of dust generated during mechanical reclamation of used sands moulds as a source of energy / M. Holtzer, AGH University of Science and Technology, Faculty of Foundry Engineering, Krakow, Poland
7. Utilisation of the Latest Binder and Sand Conditioning Technology to Reduce Costs and Improve the Foundry Environment / C. J. Wilding, Omega Foundry Machinery Ltd, UK
8. GreenSand “Less is Best” a More Sustainable Philosophy for Change / J. D. Howden, Amcol International, Australia
9. The establishment of sustainable development capacity of the foundry industry indexevaluation system / A. Guangkuo, Shenyang Research Institute of Foundry, Shenyang, China
10. Recovery of Bentonite and Other Materials from Foundry Waste Streams / V. LaFay, S&B Industrial Minerals, Cincinnati, Ohio
11. Engineering and Organizational Work, Planning and Control Method to Obtain Solutions for Waste Foundry Sands in Brazil. Success case ADF / UFS in Brazil, and presentation of the model for deploying international committee to discuss solutions for ADF / UFS / F. G. Filho, ABIFA - Brazilian Foundry Association -, Sao Paulo, Brazil
 
» ENERGY
1. The effect of GHG emission on climate change due to inefficient usage of energy in South African steel foundries / M. F. Varachia, Metal Casting Technology Station, University of Johannesburg, South Africa
2. Importance and effect of foaming slag on energy efficiency / T. Madzivhandila, University of Johannesburg, South Africa
3. Analysis of energy efficiency and consumption in South African Steel foundries / M. F. Varachia, Metal Casting Technology Station, University of Johannesburg, South Africa
4. Advanced Sustainable Foundry – Carbon Balance and Carbon Footprint in Foundry Processes and Foundry Product Cycles / J. Helber, B-B-H Beratungsbüro, Duisburg, Germany
5. Possibility check-up of shredded scraps usage in foundry / S. H. Lee, Korea Institute of Industrial Technology, Incheon, Republic of Korea
 
» MANAGEMENT
1. E-Foundry: Free Online Learning Resources in Casting Design and Simulation / B. Ravi, Indian Institute of Technology Bombay, Mumbai, India
2. Developing the Future Workforce: The UK Perspective. The need for technicians / P. A. Murrell FICME, Institute of Cast Metals Engineers, ICME, West Bromwich, UK
3. Advanced E-learning Training technologies for green sand practice and control / P. Verdot, Amcol International, Europe, USA
4. Sustainability is the Key Driver of Innovation / D.R. Cooper, Fairmount Minerals Ltd, Benton Harbor, Michigan, USA
5. Applying the Principal of the 7-I’s to Improve Technology Transfer / T.E. Prucha, American Foundry Society, Schaumburg, USA
6. 30 years tradition on education Finnish casting users / O. Piha, Aalto University, Espoo, Finland
7. If only my foundry knew what it knows …”: a 7Epsilon perspective on root cause analysis and corrective action plans for ISO9001:2008 / H. Md. Roshan, Maynard Steel Casting Company, Milwaukee, WI, USA
8. Quality and Supplier Strategy of Automotive Industry / M. Ata, Continental Automotive Systems, Frankfurt am Main, Germany
9. High Quality Foundries are closing All Over the World: Want to Know Why? / M. A. Mehling, American Foundry Society/Port Oranga, Florida, USA
10. Global Metalcasting: Assessing Our Strengths and Weaknesses & Developing Inputs for a Sustainable Future / A. T. Spada, American Foundry Society, Schaumburg, Illinois, USA
 
» YOUNG RESEARCHERS
1. Fracture characterization of new generation ferritic spheroidal cast irons / G. Artola, IK4-AZTERLAN, Metallurgy Research Centre, Durango, Spain
2. 3D Numerical Simulation of Aeration Sand Filling-High Pressure Squeeze Molding Method / N. Changjiang, Tsinghua University, Beijing, China
3. Research and Development of Innovative 2D Casting Process of CAD System Based on Neutral File and Non-parametric Drawing / H.T Tang, State Key Laboratory of Material Processing and Die & Mould Technology, Huazhong University of Science and Technology, Wuhan, Hubei, China
4. Towards an effective dimensional verification of eolic casting / U. Mutilba, IK4-TEKNIKER, Eibar, I. del Río, IK4-TEKNIKER, Eibar, Spain
5. The research on the optimal solution for casting process design based on casting simulation software / J. X. Zhou, State Key Laboratory of Materials Processing and Die & Mould Technology, Huazhong University of Science and Technology, Wuhan, China
6. Double chains collaboration model between production management and quality control: three casting factories application cases / J. Xiaoyuan, State Key Laboratory of Material Processing and Die & Mould Technology, Huazhong University of Science & Technology, Wuhan, China
7. Characteristics of Erosive wear with FE-V-CR-C cast irons / K. Kusumoto, Muroran Institute of Technology, Muroran city, Japan
8. Process modeling and microstructure prediction validation of sand ductile iron castings / E. Salsi, Interdepartmental Center for Industrial Research CIRI-MAM of University of Bologna, Bologna, Italy
9. Machining with Ceramic Inserts of ADI Parts for Achieving Tight Tolerances / A. Fernández-Valdivielso, Department of Mechanical Engineering, University of the Basque Country, Bilbao, Spain
10. Fatigue characteristic of spheroidal graphite cast iron with alternate material of rare earth / T. Funabiki, Muroran Institute of Technology, Muroran city, Hokkaido, Japan
11. Three-dimensional numerical analysis of the harmfulness of defects in oil pipes / M. Bachir, University of Mascara, Mascara, Algeria
12. Ti-6Al-4V turbine blade investment casting melted in cold crucible induction melting / X. Chamorro, Mondragon Unibertsitatea, Mechanical and Manufacturing Department, Arrasate, Spain.
13. A Patternless Method for a Rapid Casting of Singular Parts / A. Rodríguez, Department of Mechanical Engineering, University of the Basque Country, Spain
14. Microstructural features of primary and secondary ductile high pressure die casting alloys for the automotive industry / A. Bakedano, IK4-AZTERLAN, Metallurgy Research Centre, Engineering, R&D and Metallurgical Processes, Durango, Spain
15. Evaluation of fluidity of semi-solid aluminum alloy slurry prepared by mechanical vibration / Y. Murakami, National Institute of Advanced Industrial Science and Technology, Nagoya, Japan
16. Critical Control Variables For The Coating Process of Furan Bonded Sand With Water Based Foundry Coatings / G. L. Di Muoio, Global Castings A/S, Copenhagen, Denmark
17. Sensor for the Detection of Sand-Filling-Process in Aeration Molding Machines / H. Polzin, TU Bergakademie Freiberg, Germany
 
» POSTERS
1. CADI – Carbidic Austempered Ductile Iron. Control structure in order to improve the tribological properties / M. Kranc, Department of Ferrous Alloys, Foundry Research Institute, Krakow, Poland
2. The effect of alloying elements on the elevated-temperature properties of high Si-Mo cast iron / K. H. Choe, Korea Institute of Industrial Technology, Incheon, Republic of Korea
3. Improvement of Nitriding Characteristics of Ductile Cast Iron by an Addition of Alloying Elements / Y. Kawasaki , Graduate student, Hiroshima Campus, Kinki University, Higashi-hiroshima, Hiroshima, Japan
4. New induction wireless efficient manufacturing process for furnaces / J.L. Villa, CIRCE Foundation, Zaragoza, Spain
5. Ceramic Plasma-sprayed coating for a Re-usable crucible / H. Song, Korea Atomic Energy Research Institute, Yuseong-gu, Daejeon, Republic of Korea
6. Fabrication and Characterization of U-Zr Fuel Slug prepared by an Injection CastingMethod for SFR / H. Song, Korea Atomic Energy Research Institute, Yuseong-gu, Daejeon, Republic of Korea
7. Microstructure behavior of brass alloy billet solidified by progressively controlled casting / J. Y. Cho, Korea Institute of Industrial Technology, Incheon, Republic of Korea
8. Microstructure and hardness of an Al-7wt.%Si alloy billet solidified by progressivelycontrolled casting / K.C. Hwang, Korea Institute of Industrial Technology, Incheon, Republic of Korea
9. The effect of Misch-metal on Microstructure and Hardness of AM80-xMM Magnesium Alloy / S-G. Lim, Engineering Research institute, Department of Metallical and Materials Engineering, Gyeongsang National University, Jinju, Republic of Korea
10. The Recycling of Current Scrap of The Casting Alloys of Magnesium Through The Use of The Innovative Method Endomodification / R. Tomasz, Foundry Research Institute, Krakow, Poland
11. Metal Wastes Recycling By Means Of Rotary Furnaces / S.L. Rovin, Research and Development Enterprise «Technolit», Minsk, Belarus
12. Challenges and Developments of Hadfield manganese steel castings based on service life / C.S Mahlami, University of Johannesburg, Department of Metallurgy, South Africa
13. The Effects of Ca, Mg and Si Alloys for Surface Tension and Viscosity in Molten Al, Mg Alloys / Prof. B-Y. Hur, ERI GYEONGSANG N. UNIVERSITY, Republic of Korea
14. Quantitative 3D Characterization of morphology of graphite in ductile iron by x-raycomputed tomography / A. Tchorz, Foundry Research Institute, Krakow, Poland
 
如对上述文章感兴趣,请联系全国铸造学会秘书处,索取全文。电话:024-25852311-202。
 
(中国机械工程学会铸造分会秘书处  供稿)

 
分享该文章:
欲即时了解铸造资讯,请关注铸造世界网手机版或扫描右侧二维码,关注铸造杂志官方微信。
相关新闻:
[来源:本站]
0% (0)
0% (10)
热评文章:

版权与免责声明:

① 凡本网注明"来源:铸造世界网"的所有作品,版权均属于铸造世界网,未经本网授权不得转载、摘编或利用其它方式使用。已获本网授权的作品,应在授权范围内使用,并注明"来源:铸造世界网"。违者本网将追究相关法律责任。

② 本网凡注明"来源:xxx(非本网)"的作品,均转载自其它媒体,转载目的在于传递更多信息,并不代表本网赞同其观点和对其真实性负责,且不承担此类作品侵权行为的直接责任及连带责任。如其他媒体、网站或个人从本网下载使用,必须保留本网注明的"稿件来源",并自负版权等法律责任。

③ 如涉及作品内容、版权等问题,请在作品发表之日起两周内与本网联系,否则视为放弃相关权利。

日排行
周排行
月排行